Gulf Coast Lightning Rods is a leading lightning protection systems company.  We install lightning protection rods for barns, stables, farm houses, ranches and more.

Installing a lightning protection system, which typically includes lightning rods, is highly recommended for barns, stables, and farmhouses. These structures are often in open areas and can be vulnerable to lightning strikes due to their height and the materials they are constructed from. Lightning protection systems help to mitigate the risk of damage from lightning strikes by providing a path for the lightning to safely dissipate into the ground, reducing the likelihood of fire or structural damage. It’s a proactive measure to safeguard both the property and the people and animals within it. Lightning protection systems  only account for a small portion of the total building cost.

Our Lightning Protection system services include:

• Lightning Risk Assessment
• Lightning Protection System Design
• Lightning Protection System Installation
• Tests & Inspections of Lightning Protection Systems
• Lightning Protection System Maintenance & Repair

Whether you need a lightning protection system in Florida or in another city or state we can work with you.  We install lightning protection systems throughout the nation.

Process to Install Lightning Protection for Barns, Stables and more

Here is our process for installing lightning protection for barns, stables, agricultural buildings and more.

Assessment: A thorough assessment of the barn’s structure, layout, and surrounding environment is conducted to determine the most effective placement of lightning protection components.

Design: Based on the assessment, a lightning protection system design is created. This design will include the placement of lightning rods, conductors, grounding rods, and surge protection devices.

Installation of Lightning Rods: Lightning rods, also known as air terminals, are installed at strategic points on the roof of the barn. These rods are typically made of conductive materials such as copper or aluminum and are designed to attract lightning strikes.

Installation of Conductors: Conductors, usually made of copper or aluminum, are installed to connect the lightning rods to grounding rods and other components of the system. These conductors provide a path for the lightning to safely travel to the ground. Depending on the length of the building, rods are set every 20 feet along the roof peak of a typical barn. The conductor cable is then linked to the rods and run from one end of the building to the other. Ground rods made of copper are driven into the ground to a depth of around 10 feet. Ground rods are buried about 2 feet away from the building and spaced no more than 80 feet apart, therefore the number required is determined by the length and width of the structure. The conductor cable travels down the building’s sides and connects to the ground rods. Grounding is critical since lightning rods are ineffective without it.

Grounding: Grounding rods are installed to provide a direct path for the lightning to dissipate into the ground. These rods are buried deep into the earth and connected to the conductors and lightning rods.

Protect your horses by installing lightning protection systems on stables, barns, run-in sheds, and large trees. Always hire a qualified contractor to ensure that the system is properly installed.  If the system is not properly installed, it is ineffective.  All estimates are free. Call Gulf Coast Lightning Rods today for a free estimate.

Gulf Coast Lightning Rods has 3 generations for lightning protection systems installation experience. Based in Florida, we service the Gulf States.  We design and install of lightning protection and grounding systems for barns, residential and commercial property.  We deliver high quality installations that adhere to standards.